Duerkopp Adler 530 Operating Instructions Manual page 49

Lock sewing pattern
In this submenu individual sewing patterns can be released or locked
for selection in the sewing mode.
In general the following restrictions apply:
1. Sewing pattern operation
·
The sewing pattern currently selected in the sewing mode cannot
be locked.
·
In the sewing mode, locked sewing patterns cannot be chosen from
the selection list.
Locked sewing patterns are marked with "#".
2. Sewing pattern sequence operation
·
A locked sewing pattern can be selected in a sequence. However,
when starting the sewing process (lowering of the clamping foot)
an error message appears. The sewing process cannot be started.
·
The last sewing pattern selected in the sewing pattern operation
cannot be locked.
Lock all
All sewing patterns with the restrictions specified above will be locked.
The status of the displayed sewing pattern number switches to "OFF".
Unlock all
All sewing patterns will be released.
The status of the displayed sewing pattern number switches to "ON".
Lock/unlock individual sewing pattern
Input: ON / OFF
lock all
unlock all
on
on
on
on
on
on
47
1