Duerkopp Adler 530 Operating Instructions Manual page 21

Function key
OK-key
ESC-key
P-key
S-key
F-key
OK-key + F-key
*
Testing mode = a slow following of the seam contour without effectuating a seam.
Function
If no text field is activated:
Change between the lines of the menus.
The selected line is displayed white on black.
If a text field is activated:
Increase or reduce the value of the respective point by one or change
between the parameters in case of functions with several choices.
If no text field is activated:
Activate the text field.
The value can be altered with the keys "ñ" and "ò".
If a text field is activated:
The set value is taken over.
If the clamping foot has been lowered using the keys OK + F:
The test procedure will be started.
If test functions are activated (Multitest / 180° disc):
You return to the selection menu.
If a text field is activated:
An input is aborted.
The preceding value is maintained.
In the technician and programming level
The control changes over to the sewing mode.
In the sewing mode
Lift clamping foot and stop sewing operation.
The control changes over from the sewing mode to the programming
mode.
In this mode altered stitch patterns can be memorized under a new
program number.
The control changes over from the sewing mode or sewing pattern
programming mode to the sequence programming mode.
In this mode it is possible to create new sequences or to alter existing
ones.
The control changes over from the sewing mode to the technician
mode.
This mode can only be activated after a code has been entered.
In this operating status it is possible to set basic machine parameters
and to retrieve diagnosis and adjustment programs.
*
Starts the testing mode
The clamping foot is lowered.
for the sewing process.
1
19