Duerkopp Adler 530 Operating Instructions Manual page 69

Change contour
Stitch coordinates
Selection of the submenu for altering the stitch coordinates.
Delete stitch:
Delete stitch.
Input: Stitch number to be deleted
Add stitch:
Add stitch.
Input: Stitch number before which a stitch is to be added.
The submenu for altering the stitch coordinate appears.
Add stitch (at the end)
The submenu for altering the stitch coordinate appears.
Parameter
Selection of the submenu for altering the contour parameters.
Submenu stitch coordinates
If the contour to be altered has less than 99 stitches, the submenu
appears immediately.
If the contour to be altered has more than 99 stitches, the following
menu appears first:
–
Select desired range of stitches with the keys "ñ" or "ò".
–
Select range of stitches with the key "OK".
The submenu "Stitch coordinates" appears.
stitch coordin
rem.st.
ins.st.
append stitch
parameters
no.stitch
no.st.av.
67
1