Duerkopp Adler 530 Operating Instructions Manual page 34

32
Skipping from sewing pattern sequence operation to sewing
pattern operation
–
Actuate the function key "S" while the main menu is being
displayed in order to skip to the sequence programming mode.
–
Start the editing by actuating the "OK" key.
–
Select the sequence number 0 by using the "ò" key.
–
Confirm the selection with the "OK" key.
The sewing pattern sequence operation is switched off.
–
Actuate the "ESC" key or the "ï" key.
The main menu for the sewing pattern operation will be displayed.
3
1
0