PWM Output test
This test function checks the function of the magnets.
–
Start the test function by pressing the "OK" key.
–
Select the desired output element by pressing the keys "ñ" or "ò".
–
Switch the selected output element on and off by pressing the
"OK" key.
–
The issued value for the selected output element is displayed.
The value specifies the impulse rate for the controlling of the
output element.
–
Press function key "ESC" to quit the test function.
Caution: Danger of injury !
Do not reach into the running machine during the function test of the
output elements.
Output element
PWM 1
PWM 2
PWM 3
PWM output test
output
Function
Clamp foot magnet
Trimmer magnet
Thread wiper magnet
1
53