Duerkopp Adler 530 Operating Instructions Manual page 66

Maximum sewing area
(grey field)
Machine neutral point
64
Determining the contour coordinates
When creating a seam contour every individual stitch has to be entered
in the control indicating its position in the coordinate system (X- and
Y-axis). Therefore the individual coordinate points have to be
determined before. This can be done with the help of millimeter graph
paper.
Sketched seam contour
Coordinate system with X- and Y-axis
Note
The seam contour should be laid out in such a way that the machine
neutral point is in the middle of the contour, if possible.
–
Sketch the maximum sewing field size on the millimeter graph
paper (X = max. 40 mm, Y = max. 20 mm).
–
Draw coordinate system in the centre of the sewing field.
–
Draw in seam contour.
–
Determine the X- and Y-coordinates for every desired stitch.
–
Enter X- and Y-coordinates in the control (see next page).
Stitch to be determined