Duerkopp Adler 530 Operating Instructions Manual page 70

68
1
-
99
–
Select desired stitch with the keys "ñ" or "ò".
–
Select stitch with the key "OK".
The submenu for altering a stitch coordinate appears.
If a stitch operation is classed with a stitch, this will be marked with an
asterisk (*) instead of a diagonal stroke (/) on the display.
Submenu "Alter stitch coordinate"
This submenu appears when selecting a stitch coordinate from the
menu "Stitch coordinates" and after adding or altering a stitch.
X10:
Y10:
Op10:
Example
X10
Altering of the X-coordinate for stitch 10
Input:
Y10
Altering of the Y-coordinate for stitch 10
Input:
OP10
Altering of the stitch operation for stitch 10
Input:
Hint:
The stitch operation entered will be executed after the stitch.
0.0
0.0
1
-20.0 ... +20.0
-10.0 ... +10.0
0 ... 1 (compare to the opposite table)