Duerkopp Adler 530 Operating Instructions Manual page 54

Cnc automat for button sewing

Hide thumbs Also See for 530:

Table of Contents

Output element

Y 1

Y 2

Y 3

Y 4

Y 5

Y 6

Y 7

Y 8

Output test

With this test function the function of the output elements is checked.

–

Start the test function with the "OK" key.

–

Select desired output element with the keys "ñ" or "ò".

–

Switch desired output element on and off with the key "OK".

–

Press function key "ESC" for leaving the test function.

Caution: Danger of injury !

Do not reach into the running machine during the function test of the

output elements.

Function

Laser marking lamp 1, if the option is activated

Laser marking lamp 2, if the option is activated

Laser marking lamp 3, if the option is activated

Depending on the activated option and the output configuration

The recent configuration of the outputs is indicated in the submenu

"Output configuration" of the menu Configuration.

output test

output

Table of Contents

Chapters

Table of Contents