Duerkopp Adler 530 Operating Instructions Manual page 85

Error Description
code
3301 Error control
3320 procedure / Test
- procedure /Step motor
3322 test procedure /
3330 Starting procedure /
- Sewing procedure /
3332 Winding procedure /
3340 Adjusting aids
3341
3350
-
3351
3353
3360
3361
3400
3401
3403
3358 Sewing procedure:
Handwheel turned
during interruption
3500 Error command
- interpreter/ motor
3506 synchronization
3520
-
3530
3540
3545
3721
3722
4301 Dongle missing
4302 Dongle empty
4304 Wrong dongle type
4307 Wrong machine class
4311 Error Format-ID
4312 Unknown dongle type
4530 Error menu system /
- User log-in
4537
4900
5101 NV-RAM empty
5104 NV-RAM
Error check sum
Possible causes
Internal error
Handwheel turned manually
during sewing interruption
Internal error
No dongle plugged in
No data saved on the dongle
The dongle has not the proper
format for the wished function
The dongle data is not
formatted for the cl. 530
Dongle not formatted
properly
Dongle faulty
Dongle not formatted
properly
Dongle faulty
Internal error
Control is brand new, no data
found
Control is for another class,
incompatible data
· NV-SRAM faulty
· Breakdown
Troubleshooting
- Switch the sewing machine off
and on again
- Software update
- Contact the DA-Service staff
Cancel the sewing procedure:
Step the pedal backwards
· Switch machine off and on again
· Software update
· Contact the DA-Service staff
Connect the dongle to the control
Save the data on the dongle
- Use other dongle type
- Format dongle
- Use other dongle type
- Format dongle
- Format the dongle anew
- Use a new dongle
- Format the dongle anew
- Use a new dongle
· Switch machine off and on again
· Software update
· Contact the DA-Service staff
Data will be reset to factory setting.
· Check through Multitest, if
necessary replace control
· Switch machine off and on again
Data will be set back to factory
setting
1
83