Duerkopp Adler 530 Operating Instructions Manual page 46

44
Submenu Times
t1:
t2:
t3:
t4:
Delay between pedal level 1 (lowering the clamping foot) and
sewing start (t1)
Time only relevant with quick start via pedal or hand switch (optional).
Input:
Preset value:
Turn-on delay for the thread wiper magnet (t2)
This menu item will only be displayed if the option "electric thread
wiper" is activated in the menu "equipment".
Input:
Preset value:
Delay thread wiper magnet off — clamping foot magnet on (t3)
The delay between the switching off of the thread wiper magnet and
the switching on of the clamping foot magnet.
This menu item will only be displayed if the option "electric thread
wiper" is activated in the menu "equipment".
Input:
Preset value:
Delay between clamping foot magnet on — reference run (t4)
The delay between the switching on of the clamping foot magnet and
the referencing of the step motors.
Input:
Preset value:
250
40
50
100
50 ...300 ms
150 ms
30 ...100 ms
40 ms
0 ...300 ms
50 ms
0 ...300 ms
70 ms