Duerkopp Adler 530 Operating Instructions Manual page 29

Laser marking light (optional)
Winding thread on to a bobbin:
With pedal
–
Step pedal forwards (step 2).
The sewing motor starts.
–
Step pedal backwards.
The sewing motor stops.
Via control panel BF3
–
Press "F" key .
The sewing motor starts.
–
Press "ESC" key.
The sewing motor stops.
With push button (optional)
–
Press key 2.
The sewing motor starts.
–
Press key 1.
The sewing motor stops.
Soft start
Via this parameter the soft start can be switched on or off.
Input : ON/ OFF
The menu item is only available if the laser light is activated in the
configuration menu (compare chapter).
Laser light 1 ... 3
Switching on/off of the laser marking lights 1 to 3.
Input : ON/ OFF
1
27