8.[Administration] Tab Page
Fax settings
You can specify fax settings.
The [Fax] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Setup] menu:
P.22 "Access policy mode"
P.136 "[Setup] Item list"
Setting up Fax Setting
In Fax Setting, you can set the default fax settings that apply to fax operations from the touch panel.
Some items may not be displayed or may not function on some models.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Item name
1
Terminal ID
2
Fax Number
3
Line2 Number
4
Ringer Volume
5
Monitor Volume
6
Completion Tone Volume
Enter the terminal ID name (company name) to identify this equipment. The name will be
printed at the leading edge of all documents transmitted.
Enter the fax number of this equipment. This fax number will be printed at the leading edge
of all documents transmitted from Line 1.
Enter the fax number for Line 2 of this equipment, if installed. This fax number will be printed
at the leading edge of all documents transmitted from Line 2.
Select the ringer volume.
Select the volume of the line monitor during transmission.
Select the volume of the line monitor when completing the printing of a received fax.
8 [Administration] Tab Page
Description
[Setup] Item list
183