8 [Administration] Tab Page
Setting up Fax settings
You can configure the fax device and fax operation settings from the [Fax] submenu under the [Setup] menu.
Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated
by pressing the [FUNCTION CLEAR] button on the control panel or after an Auto Clear time period.
The [Fax] submenu in the [Setup] menu is available only when the optional Fax Unit is installed.
Setting the fax settings
1
Start TopAccess access policy mode.
P.22 "Access policy mode"
2
Click the [Administration] tab.
3
Click the [Setup] menu and [Fax] submenu.
The Fax submenu page is displayed.
4
In the Fax submenu page, set the fax settings as required.
You can set the following in this page.
P.183 "Setting up Fax Setting"
5
Click [Save].
The confirmation dialog box appears.
When you click [Cancel] before saving the setting changes, they will not be saved and will return to the current
settings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear the
changes and restore the current settings before saving the changes.
226
[Setup] How to Set and How to Operate