Oki CX4545 MFP Manual page 258

8 [Administration] Tab Page
Windows Domain Authentication
1
2
3
4
Item name
1 Use NT Domain Server
2 Domain 1 - Domain 8
If the wrong primary or backup domain controller is specified, the [OK] in the user authentication screen on the touch panel is
highlighted while this equipment searches for the primary or backup domain controller for 2 to 4 minutes.
3 Connection Timeout
4 Role Based Access Setting
256 [Security] Item list
Select this check box if you are managing the domain using the NT domain controller.
Specify the domain you want to use for Windows domain authentication.
Click one of the domains and specify the following items in the displayed screen to register
the domain.
Domain Name — Enter the domain name.
PDC — Enter the server name or IP address of the Primary Domain Controller (PDC). You
can enter up to 128 alphanumerical characters and symbols.
BDC — Enter the server name or IP address of the Backup Domain Controller (BDC) as
required. You can enter up to 128 alphanumerical characters and symbols.
Enter the timeout period for quitting communication when no response is received from the
PDC or BDC server. Specify within the range from 1 to 180 seconds.
Configure role based access using an LDAP server.
Role Based Access using LDAP server — Select whether enable or disable role based
access. [Disable] is set as the default.
LDAP Server — Select the LDAP server that manages the Role Based Access Control.
Description