8 [Administration] Tab Page
Setting up Policy for e-Filing Boxes,Template Groups,Templates,SecurePDF,
SNMPv3, Cloning
You can configure policies for passwords for operations and applications on your equipment.
1
2
3
Item name
1
Minimum Password Length
2
Requirements to Apply
3
*3
Lockout Setting
*1 With SNMPv3, a password of at least one character is required.
*2 With Cloning, you can also register the same password as the file name.
*3 The Lockout Setting is enabled only when you are using e-Filing Boxes.
268
[Security] Item list
Specify the minimum number of digits for the password. Specify within the range from 0 to
*1
20.
"0" is set as the default.
Select [Enable] to set restrictions on the character strings that can be used in passwords.
[Disable] is set as the default.
Restrictions
The user name and password cannot be the same.
The same password cannot be used again.
Specify whether or not to enable the lockout setting when the user failed to supply the
correct password. [Enable] is set as the default.
Number of Retry — Specify the number of retries before lockout. Specify within the range
from 1 to 30 times. "10" is set as the default.
Lockout Time — Specify the duration to lock out the user. Specify within the range from 1 to
1440 minutes. "1" is set as the default.
Description
*2