Oki CX4545 MFP Manual page 148

8 [Administration] Tab Page
Item name
1 Enable IP Filtering
IP filtering is valid only in a network environment implemented with IPv4. It is not available in an IPv6 network environment. If
you need to use IP address filtering under IPv6 environment, select MAC address filtering.
2 IP Filtering Rule
3 IP Filtering
Only IPv4 addresses are available. An IPv6 address cannot be specified.
4 Enable MAC Address Filtering
5 MAC Address Filtering Rule
6 MAC Address Filtering
146 [Setup] Item list
Select [Enable] for IP address filtering. When [Enable] is selected, access from devices on a
network to which the IP address (specified in [IP Filtering]) is set is restricted under
conditions set in [IP Filtering Rule]. [Disable] is set as the default.
Select IP address filtering rules.
 Permit — Select this to permit access from devices on a network to which the IP
address (specified in [IP Filtering]) is set.
 Deny — Select this to deny access from devices to which the specified IP address is
set.
Enter the starting IP address and the ending IP address of a target client computer for IP
filtering. Up to 10 addresses can be specified.
Select [Enable] for MAC address filtering. When [Enable] is selected, access from devices
on a network to which the MAC address (specified in [MAC Address Filtering]) is set is
restricted under conditions set in [MAC Address Filtering Rule]. [Disable] is set as the
default.
Select MAC address filtering rules.
 Permit — Select this to permit access from devices on a network to which the MAC
address (specified in [MAC Address Filtering]) is set.
 Deny — Select this to deny access from devices to which the specified MAC address is
set.
Enter the MAC address of a target client computer for MAC address filtering. Up to 10
addresses can be specified.
Description