Oki CX4545 MFP Manual page 243

8.[Administration] Tab Page
5
Click [Save].
The confirmation dialog box appears.
 When you click [Cancel] before saving the setting changes, they will not be saved and will return to the
current settings. Note that they will not be returned to the factory default by clicking [Cancel]. Click this to
clear all the changes made and return the settings to the current ones.
 Click [Restore to Factory Default] to return the settings to the factory default.
6
Click [OK] to apply the changes.
The setting value may not be reflected on the screen even after changing the setting by clicking [Save] if you are using
Internet Explorer; however, the new setting is properly applied. In such a case, click the submenu to refresh the screen
and display the current setting status.
8 [Administration] Tab Page
[Setup] How to Set and How to Operate 241