8.[Administration] Tab Page
[Add Manual Key] / [Modify Manual Key] screen
You can display this screen by clicking the [Add] button for Manual Key or a registered manual key name.
You can set a manual key to use in IPsec.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Item name
1
[OK] button
2
[Cancel] button
3
[Reset] button
4
Manual Key Name
5
Encryption Algorithm
6
Hash Algorithm
Saves the key setting.
Cancels registration of the key.
Returns the settings to the defaults.
Enter the name of the manual key. You can enter up to 63 alphanumerical characters
and symbols other than #, %, &, +, \ (backslash), ' (apostrophe), ; (semicolon) and ,
(comma).
Select an encryption algorithm.
None — Select this not to perform data encryption.
AES-256-CBC — Select this to use AES-CBC (256 bits).
AES-192-CBC — Select this to use AES-CBC (192 bits).
AES-128-CBC — Select this to use AES-CBC (128 bits).
3DES-CBC — Select this to use 3DES-CBC.
DES-CBC — Select this to use DES-CBC.
Select a hash algorithm.
SHA1 — Select this to use SHA1.
MD5 — Select this to use MD5.
AES-XCBC-MAC — Select this to use AES-XCBC-MAC.
8 [Administration] Tab Page
Description
[Setup] Item list
173