Setting Up Email Print - Oki CX4545 MFP Manual

8 [Administration] Tab Page
 Setting up Email Print
In Email Print, you can set how the E-mail print jobs are printed.
1
2
3
4
5
6
7
8
9
Item name
1 Enable Print Header
2 Enable Print Message Body
3 Maximum Email Body Print
4 Enable Print Email Error
5 Enable Email Error Forward
6 Email Error Transfer Address
7 Enable Partial Email
8 Partial Wait time
9 MDN Reply
206 [Setup] Item list
Select whether to print the E-mail header when receiving E-mail print jobs. [Disable] is set
as the default.
Select whether to print the body message when receiving E-mail print jobs. [Enable] is set
as the default.
Enter the maximum number of pages to print the body strings of the received E-mail print
job. You can enter between 1 to 99. "5" is set as the default.
Select whether to print the report when an error occurs for E-mail printing. [Enable] is set as
the default.
Select whether to send an error message to an administrative E-mail address when E-mail
printing cannot be completed. [Disable] is set as the default.
If enabling the Email Error Forward, enter an administrative E-mail address where the error
message is sent. You can enter up to 140 alphanumerical characters and symbols.
Select whether to print E-mail jobs that are partially received. [Disable] is set as the default.
Enter how long this equipment should wait before printing a partial E-mail job. Specify within
the range from 1 to 24 hours. "24" is set as the default.
Select whether to send an MDN message reply or not when the equipment receives an
E-mail print job with an MDN request. [Disable] is set as the default.
Description