Uploading The Client Software - Oki CX4545 MFP Manual

8 [Administration] Tab Page
 Uploading the client software
An administrator can upload client software embedded in this equipment. Users can download the software on their
computers using the TopAccess [Install Software] link.
 Installer (Setup files) for Client Utilities CD-ROM
 Macintosh PPD Files
 UNIX Filters
Uploading new software overwrites the old version of software that had been uploaded.
The files for uploading are provided for each client software.
- Driver Files
- Contact your dealer for information about obtaining driver files with the installer.
- You can create a driver file for uploading by compressing folders under "Client\Drivers" in the Client Utilities CD-
ROM in zip format.
 P.303 "Preparing a driver file for uploading"
- Macintosh PPD Files — These files are stored in the "MacPPD\OSX\10_2-10_3" and "MacPPD\OSX\10_4-"
folders in the Client Utilities CD-ROM. The PPD file for duplex printing is stored in the "2-sided_default" folder,
whereas the PPD file for simplex printing is stored in the "normal" folder.
- Unix Filters — These filters are stored in the folder for each workstation in the "Admin" folder (for black printing) or
"Admin" folder (for color printing) included in the Client Utilities CD-ROM. The CUPS filter for duplex printing is
stored in the "2-sided_default" folder whereas the one for simplex printing is in the "normal" folder.
Uploading new versions of client software in TopAccess
1
Start TopAccess access policy mode.
 P.22 "Access policy mode"
2
Click the [Administration] tab.
3
Click the [Maintenance] menu and the [Upload Software] submenu.
The Upload Software submenu page is displayed.
4
Select the software that you are going to upload in the [Upload Files] box.
Driver Files
Macintosh PPD Files
Unix Filters
5
Click [OK].
The bottom section in the page will be changed for selected software.
302 [Maintenance] How to Set and How to Operate
Uploads the client software installer files.
See the following for how to create a driver file for uploading.
 P.303 "Preparing a driver file for uploading"
Upload PD files for Mac OS X 10.2.4 - 10.3.x and Mac OS X 10.4 and later. In addition,
select this to upload the plug-in files used for Mac OS X 10.4 or later.
Uploads tar files for unit workstations.