Setting Up Icc Profile Settings (Supported Models Only) - Oki CX4545 MFP Manual

8 [Administration] Tab Page
 Setting up ICC Profile settings (supported models only)
You can configure profiles for printer functions from the [ICC Profile] submenu under the [Setup] menu.
This function is available only for models that support color printing.
 P.242 "Configuring the source profile"
Setting the ICC Profile settings
1
Start TopAccess access policy mode.
 P.22 "Access policy mode"
2
Click the [Administration] tab.
3
Click the [Setup] menu and [ICC Profile] submenu.
The ICC Profile submenu page is displayed.
4
In the ICC Profile submenu page, set the ICC Profile settings as required.
You can set the following in this page.
 P.207 "Setting up RGB Source Profile"
 P.207 "Setting up CMYK Source Profile"
 P.208 "Setting up Destination Profile"
240 [Setup] How to Set and How to Operate