Setting Up Daylight Savings Time Setting - Oki CX4545 MFP Manual

8 [Administration] Tab Page
 Setting up Daylight Savings Time Setting
Make the required settings for daylight savings time.
1
2
3
Item name
1 Daylight Savings Time
2 Offset
3 Dates
 If you change the settings during the daylight saving time period, the changes will be reflected to the equipment's
clock. If you disable the settings during the applicable period, the equipment's clock will shift to the standard time.
 If the equipment is turned off at the start or end date and time, the equipment will shift the clock the next time it is
turned on.
 After the clock shifts, the daylight saving time will also apply to the weekly timers.
 Select the Start and the End dates and times based on the time set for the equipment.
 P.141 "Setting up Date & Time"
 If the same month is specified for the Start and the End dates, the equipment does not shift the clock automatically.
 Setting up WEB General Setting
You can set the session timer for TopAccess.
1
Item name
1 Session Timer
When logged in the access policy mode, you will be automatically logged out if the session timer elapses without any
operation being performed.
142 [Setup] Item list
Select [Enable] to shift the clock to the daylight savings time. [Disable] is set as the default.
Select the desired offset (time difference) from the local standard time. You can select from
between -2 and +2 hours, excluding 0 hour, in 30-minute increments. [+1:00] is set as the
default.
Select the applicable period for the daylight savings time.
 Start — Select or enter the start date and time of daylight savings time.
 End — Select or enter the end date and time of daylight savings time.
Enter how long you want this equipment to preserve the session data of TopAccess. You
can enter any integer between 5 to 999. This setting also applies to the session data of the
e-Filing web utility. "10" is set as the default.
Description
Description