Oki CX4545 MFP Manual page 272

8 [Administration] Tab Page
 Installing IPsec certificate
1
Start TopAccess access policy mode.
 P.22 "Access policy mode"
2
Click the [Administration] tab.
3
Click the [Security] menu and [Certificate Management] submenu.
The Certificate Management page is displayed.
4
Click [Browse] for [Import] under [Device Certificate] to select the certificate file for
IPsec and then click [Upload].
The alert message dialog box appears.
5
Click [OK].
The IPsec certificate is installed.
This alert message shows that you must enter a password on the control panel of this equipment after you
installed the IPsec certificate. The certificate cannot be used unless you enter a password.
6
Click [Save] on the [Certificate Management] submenu.
7
You must enter a password for IPsec certificate on the control panel of this equipment
before setting up the IPsec.
For instructions on how to input the password, refer to the following section in the MFP Management Guide.
Chapter 2 "SETTING ITEMS (ADMIN)" - "Setting Network Functions" - "Decrypting the user certificate"
270 [Security] How to Set and How to Operate