8.[Administration] Tab Page
The setting value may not be reflected on the screen even after changing the setting by clicking [Save] if you are using
Internet Explorer; however, the new setting is properly applied. In such a case, click the submenu to refresh the screen
and display the current setting status.
Setting up Printer settings
You can configure printer operations and printer options for RAW print jobs from the [Printer] submenu under the [Setup]
menu.
P.236 "Setting up Raw Job Setting"
Setting the Printer settings
1
Start TopAccess access policy mode.
P.22 "Access policy mode"
2
Click the [Administration] tab.
3
Click the [Setup] menu and [Printer] submenu.
The Printer submenu page is displayed.
4
In the Printer submenu page, set the Printer settings as required.
You can set the following in this page.
P.199 "Setting up General Setting"
P.200 "Setting up Default Raw Job Setting"
P.201 "Setting up Raw Job Setting"
8 [Administration] Tab Page
[Setup] How to Set and How to Operate
235