Output Quality - Xerox 604P18228 Quick Reference Manual

The maximum number of sheets is 20 when stapling heavyweight paper.

Output Quality

Stray marks or black marks from hole drilled originals
are not removed
Images are out of sequence or upside down when the
Booklet Creation Feature is used
The output is blank
Page 12-8
Check the correct option has been selected on the Touch Screen.
Check the Touch Screen for a fault message indicating no staples. Replace the
staple cartridge.
When using large paper, remove any output contained in the Stacker Tray.
Check that the Chad Bin is not full. The Chad Bin collects waste from the hole
punch. Refer to the Information and Training (CD2) for instructions.
Check the correct paper size has been selected for the paper loaded in the tray.
Check the paper tray guides are locked into position against the paper.
Use the Edge Erase to erase the edge with the drilled holes.
Copy from the document glass with the document cover down.
Ensure that the originals are in the correct sequence.
Feed LEF originals to SEF orientated paper stock.
Enable the display options for Booklet Creation and ensure that the correct
sequence is selected (i.e.Left to Right or Right to Left).
Ensure the originals are loaded either face up in the document handler or face
down on the document glass in the top right position.
Quick Reference Guide