Laser Safety Information; Operational Safety Information - Xerox 604P18228 Quick Reference Manual

Laser Safety Information

This product complies with safety standards and is certified as a Class 1 Laser
product under the US Department of Health and Human Services (DHSS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act
of 1968. This product does not emit hazardous laser radiation.
CAUTION: Use of controls, adjustments or performance of procedure other
than those specified herein may result in hazardous light exposure.
Since radiation emitted inside this product is completely confined within the
protective housing and external covers, the laser beam cannot escape from the
machine during any phase of the user operation.
The Center for Devices and Radiological Health (CDRH) of the US Food and Drug
Administration implemented regulations for laser products on August 1 1976. These
regulations apply to laser products marketed in the United States.The label on the
machine indicates compliance with CDRH regulations and must be attached to
laser products marketed in the United States.
This product contains laser warning labels. These labels are intended for use by
Xerox Service Representatives and are placed on or near panels or shields that
require special tools for removal. Do not remove any of the panels. There are no
operator serviceable areas inside these covers.

Operational Safety Information

To ensure the continued safe operation of your Xerox equipment, follow these
safety guidelines at all times.
Do These:
Page 1-12
Always connect equipment to a correctly grounded power outlet. If in doubt,
have the outlet checked by a qualified electrician.
This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug
will fit only into an earthed electrical outlet. This is a safety feature. To avoid risk
of electric shock, contact your electrician to replace the electrical outlet if you are
unable to insert the plug into it. Never use a plug that lacks an earth connection
terminal to connect the product to an electrical outlet.
Always follow all warnings and instructions that are marked on or supplied with
the equipment.
Always exercise care when moving or relocating equipment. Please contact your
local Xerox Service Department, or your local support organization to arrange
relocation of the product to a location outside of your building.
Always locate the equipment in an area that has adequate ventilation, and the
room for servicing. See Install guide for minimum dimensions.
Quick Reference Guide