Build Job - Xerox 604P18228 Quick Reference Manual

Build Job

Use this feature to build a job that requires different settings for each page. For
example, if a set of documents consists of some pages with text and some with
photos, the appropriate setting for each original can be applied and the job can still
be completed as a single job. This feature is also useful if your job has more than
70 pages, which exceeds the maximum capacity of the document handler.
To use Build Job, split the job into programing and scanning segments. Select the
Build Job option and select On. Program and scan the first segment. Continue to
program and load segments until the whole job has been scanned. When the entire
job has been scanned, select Build Job Controls and select End Build Job. The job
is processed as a single job.
Options:
The feature is switched off.
Off
Use to enable the Build Job feature.
On
Select End Build Job after the last segment of the job has been scanned.
NOTE: Some of the Network Scanning features are only set when programing the
first build job segment, for example File Format, Document Name and If File
Already Exists.
Provides options which can be selected when using Build Job.
Build Job
Controls
Build Job Controls options are as follows:
Delete All segments Use to delete the current job and return to the main Build Job screen.
Page 7-22
Select this option after the last segment of the job has been scanned. The
End Build Job
job will be sent to print.
Quick Reference Guide