Original Input - Xerox 604P18228 Quick Reference Manual

Original Input

Use this option to select the orientation of the originals being scanned. The machine
can determine the size of the originals automatically, or a size can be entered
manually.
This option is also used when scanning mixed sized originals.
NOTE: If your machine does not show Mixed Size Originals, it is recommended
that the originals used are of the same size.
Options:
Use this option to allow the machine to recognize the size of the originals being fed
Auto
through the document handler.
Use this option to specify the dimensions of the document scanning region when
Manual Platen
Input
scanning from the document glass. There are several dimensions that correspond
to common document sizes and orientations.
Select a standard size or use Custom to manually adjust the scanning dimensions.
Use this feature to scan a document containing mixed size originals. The originals
Mixed Size
Originals
must be the same width, for example 8.5 x 11" long edge feed and 11 x 17" short
edge feed. Load documents in the document handler when using this feature.
Use this option to select the orientation of the image entering the document handler.
Image
Orientation
If using the document glass, the orientation of the scanned image will match the
orientation of the original document.
Page 8-14 Quick Reference Guide