Resolving Output Quality Problems Using Basic Copying; Added Features, And Image Quality Tabs - Xerox WorkCentre M24 User Manual
Xerox workcentre printer/copier user guide
Hide thumbs
Also See for WorkCentre M24:
- Reference manual (332 pages) ,
- System administrator manual (228 pages) ,
- Quick connect manual (4 pages)
Table of Contents
Advertisement
U
G
( T
S E R
U I D E
R O U B L E S H O O T I N G
Resolving Output Quality Problems Using Basic Copying, Added
Features, and Image Quality Tabs
Problem
Moiré patterns on the
copies
The entire document is
not being copied
Scattered, very light
show-through images
occur when copying a
document that is on
thin paper
A black border appears
at the edge of the copy
when a reduction
option is selected
A black border appears
on the copy of a small
document
Colors are incorrect or
have shifted over time.
5 – 1 6
)
For more information on the features on these tabs, refer to the
section entitled Copier Features, in the User Guide (Copier).
This problem occurs when original documents have halftone images.
Perform the suggested solutions in the following order:
–
Use the Sharpness feature to select Softer options until the moiré
patterns are not visible.
–
If using Photo mode, switch to Text & Photo mode.
–
Select Halftone as the Original Type.
–
Rotate the original on the Document Glass by 180 degrees.
–
Reduce or enlarge the output by 5%.
–
Enter the Original Size.
–
Reduce the image.
–
Ensure that the document placement matches the Original
Orientation setting.
–
Select Background Suppression in the Preset Color Balance
feature on the Image Quality tab.
–
To eliminate the unwanted show-through images, place the thin
(translucent) document on the Document Glass. Cover the
document with a black (or very dark) sheet of paper that is the
same size as the document you are copying.
–
Place the 2-sided original document on the document Glass with
a blank sheet of paper on top of it.
Select Auto Center in the Margin Shift feature or Border Erase on
the Added Features tab.
–
Select Auto Center in the Margin Shift feature or Border Erase
on the Added Features tab.
Or
–
Program the Original Size on the Scan Options tab for the dark
bordered document that you wish to copy.
–
Perform an Auto Gradation Adjustment.
For more information on Auto Gradation Adjustment, refer to the
User Guide (Machine Administrator).
Suggested Solution
Advertisement
Table of Contents
