Sending The Original Using Both The Adf And The Original Glass - Olivetti d-Color MF450 Reference Manual

7

Sending the original using both the ADF and the original glass

Originals can be scanned using both ADF and the original glass, and large numbers of originals can be
divided into many parts, loaded in the ADF and scanned.
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Specify the destination.
3
Specify functions if required.
4
Load the original on the original glass or in the ADF, and touch
[Scan Settings], [Separate Scan], [OK] and then press [Start]
key.
– When using the original glass and the ADF, the ADF is
given priority.
– For details on loading originals in the ADF, refer to
"Loading the original in the ADF" on page 7-6, and for
details on loading originals on the platen glass, refer to
"Loading the original on the original glass" on page 7-6.
5
Load the original sequentially in the ADF or on the original glass and press [Start] key.
– Touching [Change Setting] enables you to alter Simplex/Duplex settings and Frame Erase settings.
– Repeat this operation until you have scanned the entire original you wish to send.
The scanned original is stored in the memory.
6
Touch [Finish].
7
Press [Start] key.
Transmission begins.
7-8
Fax Operations (Option)
d-Color MF550/MF450