Saving In User Box Mode - Olivetti d-Color MF450 Reference Manual

4
7
Type in the document name, and then touch [OK].
8
Touch [OK].
The Direct Input tab appears again. The number of the specified user box appears under "Broadcast
Destinations".
9
Specify the necessary scan settings.
10
Load the document into the ADF or place it on the original glass.
11
Press the [Start] key in the control panel.
Note
Only one user box destination can be specified with a single transmission, but multiple e-mail and fax
destinations can be specified.

Saving in user box mode

Press the [User Box] key in the control panel, and then directly type in the user box destination. Documents
to be saved can be used in the same way as saved scan data.
1
Press the [User Box] key in the control panel.
The User Box Operations screen appears.
2
Touch [Save Document].
4-10
Box Operations
d-Color MF550/MF450