When Unable To Send; Redial; Auto Redial Function; Redial Confirmation Screen - Olivetti d-Color MF450 Reference Manual

Network Fax Operations (Option)
8.8

When unable to send

When IP address fax is used, if the fax cannot be sent because the recipient's line was busy, it can be
transmitted again by using the redial function.
The redial function of this function has auto redial, manual redial.
Note
The destination cannot be changed with auto redial or manual redial.
There is no E-mail resending function in internet fax.

Redial

Dialing again at the same destination is known as redial.
When fax cannot be sent since the line of recipient's fax machine is busy, the number is redialed after the
lapse of the specific period. Before redialing, the sent job is treated to be job queued of the redial stand by.

Auto redial function

When it is unable to send the fax because the recipient's line is busy, it is automatically redialed as per the
auto redial function, which is set through the Line Parameter Settings.
!
Detail
In advance, the number of auto redials is specified as 3 times for 3 minutes.

Redial confirmation screen

When the fax cannot be sent due to the problem in the recipient's fax machine, the screen to confirm redial
is displayed.
1
Touch [OK].
Redialing begins after the setting time progresses.
When the transmission is not possible even after redialing, the display screen to confirm that it cannot
be terminated normally by the job, is displayed.
d-Color MF550/MF450
8
8-23