Olivetti d-Color MF450 Reference Manual page 448

6
Item
Password TX
F-Code
2-Sided Binding Direction
Special Original
Erase
Compose (Date/Time)
Compose (Page)
Compose (Header/Footer)
Compose (Stamp)
Stamp Combine Method
[Return to Defaults] button
If "Internet Fax" was selected
Item
No.
Name
Limiting Access to Destinations
6-42
Description
Select whether or not to enable password transmission. If "ON" is selected,
specify the password.
Select whether or not to enable F-codes. If "Enable" is selected, type in the
SUB address and password.
Select the position of the document binding margin.
d-Color MF450:
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long Original" as
the setting for the loaded document.
d-Color MF550:
Select "Normal", "Mixed Original" or "Z-Folded Original" as the setting for the
loaded document.
Select whether or not to enable frame erasing.
If "ON" is selected, specify the width that is erased on all sides of the document
("Top", "Bottom", "Left" and "Right").
Select whether or not to print the date/time.
If "ON" is selected, specify settings for the following.
• Date Type
• Time Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
Select whether or not to print the page number.
If "ON" is selected, specify settings for the following.
• Page Number (Range: -99999 to 99999)
• Chapter (Range: -100 to 100)
• Page Number Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Size
Select whether or not to print the header/footer.
If "ON" is selected, specify the registration number of the header/footer. To
check the registered header/foot, click the [Confirm Registed Contents] but-
ton.
Select whether or not to print the stamp.
If "ON" is selected, specify settings for the following.
• Preset Stamp or Registered Stamp
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
To check a registered stamp, click the [Confirm Registed Contents] button. A
registered stamp must first be registered from the control panel.
Select "Image" or "Text".
Click this button to reset the settings in the Application Setting page to their
defaults.
Description
Specify the registration number.
Select "Use opening number" or "Direct Input".
If "Direct Input" is selected, type in the number. If "0" is specified, the user box
is automatically registered with the next available number.
Type in the name of the program (up to 24 characters).
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the [Search from
List] button, and then select an access permission group from the list. If "Set
direct Reference Allowed Level" is selected, select a level.
Web Connection Operations
d-Color MF550/MF450