Olivetti d-Color MF450 Reference Manual page 404

5
17
If necessary, specify settings for "anonymous", "PASV mode", "Proxy" and "Port Number".
– To enter a port number, press the [C] (clear) key to clear the current value, and then use the keypad
to type in the port number.
– If a value outside the allowable range is specified, the message "Input error" appears. Type a value
within the allowable range.
18
Touch [OK].
The FTP destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit].
To delete a registered destination, select it, and then touch [Delete].
Note
The registration cannot be completed if no settings are specified for "Name", "Host Address", "File
Path", "User ID" and "Password".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
5-76
Network Scanner Operations
d-Color MF550/MF450