Olivetti d-Color MF450 Reference Manual page 491

Network Fax Operations (Option)
– Re-select the destination to be cancelled to cancel the selected destination.
– All entered numbers and selected settings are cleared on pressing [Reset] key.
– When [Manual Destination Input] is prohibited, [Direct Input] tab is not displayed.
– Recipient E-mail addresses can be specified more easily by registering the recipient's E-mail
addresses to the Address Book, Group destinations, or Program destinations.
Entered destination is displayed in the left panel of Broadcast Destination list.
7
In case of direct input, enter the E-mail address of the transmission destination and then touch [RX
Ability (Destination)].
8
Select the Compression Type, Paper Size and Resolution to match the recipient's reception capability
in the recipient's machine reception capability screen.
– Scan Setting functions are specified as follows at the time of purchase.
Compression Type: MH
Paper Size: A4
Resolution: 200e200dpi (Fine) /200e100dpi (Standard)
9
Touch [OK] until it returns to the Fax/Scan screen.
10
Press [Start] key.
– The following screen is displayed when the TX Result Report Check screen is set for display. The
TX Result Report is printed on touching [Yes].
– When the Destination Check Display Function is set, the Destination Settings screen is displayed.
Confirm that the destination is correct and touch [Send].
– Press [Stop] key when the fax sending is aborted.
Scanning of the original begins, and the original is sent.
!
Detail
If the fax could not be sent, a TX Result Report is printed (When specified as to print the TX Result
Report). And, it can be set such that the TX Result Report Check screen is displayed so as to enable
the selection of whether or not to output the transmission result report screen for every transmission.
d-Color MF550/MF450
8
8-5