Olivetti d-Color MF450 Reference Manual page 86

Hide thumbs Also See for d-Color MF450:

Table of Contents

Center Staple/Fold (d-Color MF450)

Output Tray (d-Color MF450)

If no finisher is installed

If the sorting conditions are met, printed copies are fed out and sorted in an

alternating crisscross pattern.

If a finisher is installed

The copies are fed out and stacked on top of each other with each set shifted

to separate it.

Select one of these settings to fold copies. The copies can also be bound with

staples at the same time.

Select this setting to fold copies. The copies can also be bound with staples at

the same time.

The "Center Staple & Fold" setting can be used if the saddle stitcher is installed

on optional finisher FS-519

Select the output tray where the finished copies are to be fed.

Select one of these settings to bind the copies with a staple in the corner or

with two staples.

Holes are punched (4 holes) in the copies for filing them.

Copy Operations

d-Color MF550/MF450

D-color mf550