Selecting A Setting For Oversized Paper ("Wide Paper" Settings) - Olivetti d-Color MF450 Reference Manual

Copy Operations

Selecting a setting for oversized paper ("Wide Paper" settings)

Wide paper can be loaded into tray 1 or tray 2 or the bypass tray.
Wide paper is a size larger than the standard size and allows copies of standard-sized documents to be
printed so that there is no loss at the edges. For example, if A3 wide paper is used, an area up to
311.1 mm e 457.2 mm can be printed, allowing the entire area of an A3-size document to be printed.
If wide paper is loaded, it will be necessary to enter the paper size.
The following procedure describes how to specify the setting for wide paper loaded into the bypass tray.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for the bypass tray.
– To set the paper size for tray 1 or 2, touch the button for the corresponding paper tray.
3
Touch [Change Tray Settings].
4
Touch [Wide Paper].
d-Color MF550/MF450
2
2-91