User Box - Olivetti d-Color MF450 Reference Manual

Network Scanner Operations
6
Touch [Index], and then select the index characters.
7
Touch [OK].
8
Touch [E-Mail Address], and then type in the e-mail address, using the keyboard that appears.
9
Touch [OK], and then touch [OK] in the next screen that appears.
The e-mail destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit].
To delete a registered destination, select it, and then touch [Delete].
Note
The registration cannot be completed if no settings are specified for "Name" and "E-Mail Address".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.

User box

Settings can be specified for the following for the user box destination to be registered.
Parameter
Name
Index
User Box
!
Detail
In order to register a user box as a destination, the user box must be registered first.
d-Color MF550/MF450
Description
Type in a name of 24 characters or less for the registered destination.
Select the index characters. For frequently used destinations, touch [Favorites] so
that the destination can be found more easily.
Select one user box where data is to be saved.
5
5-69