Document Name - Olivetti d-Color MF450 Reference Manual

5
5
To select the staple position, touch [Corner] or [2 Positions], and then touch [Position Setting].
6
Touch the button for the desired position, and then touch [OK].
7
Touch [OK], and then touch [OK] in the next two screens that appear.

Document name

Specify the name of the scan data. If no document name is specified, the name is automatically set based
on the following information.
As an example, the name "SKMBT_C55006102315230" is described below.
Section
S
KMBT_C550
06102315231
_0001
.(file_extension)
5-60
Description
This letter indicates the mode when the document was saved.
C: Copy
S: Fax/Scan
P: Print
Note
"S" appears for documents saved in the Fax/Scan mode screen or the User Box screen.
This represents the name of the device that scanned the data. The factory default is
"KMBT_C550" ("KMBT_C450" on d-Color MF450). This name can be changed with the "Input
Machine Address" parameter on the Administrator/Machine Setting screen in Administrator
mode. A name of up to 10 characters can be specified.
This indicates the year (first two digits), month, day, hour and minutes when the data was
scanned. The last digit is a serial number if the document is part of a series of scans.
This indicates the page when multi-page data is scanned. This numeral does not appear in the
screen for the document name; however, it is added automatically as part of the name when the
document is routed. Add this part to the name according to the naming conditions of the server
receiving the files, for example, when data is sent by FTP.
This is the extension for the specified data format. These characters do not appear in the screen
for the document name; however, they are added automatically as part of the name when the
document is routed.
Network Scanner Operations
d-Color MF550/MF450