2
2.26
Inserting paper between OHP transparencies ("OHP Interleave"
function)
In order to prevent copies printed onto OHP transparencies from sticking together as a result of the heat that
is produced during copying, paper (interleaves) can be inserted between the transparencies
0
No Finishing setting can be used.
1
Position the document to be copied.
–
For details on positioning the document, refer to "Feeding the document" on page 2-27.
–
For details on loading OHP transparencies, refer to "Paper types and paper capacities" on
page 2-81 and "Loading paper into the bypass tray" on page 2-23.
2
In the Basic screen, touch [Color], and then touch [Black].
–
Printing on OHP transparencies is possible only in black.
3
Load the OHP transparencies into the bypass tray, and load the interleaf paper into the desired paper
tray.
–
Use interleaf paper with the same size as the OHP transparencies.
4
Select [Transparency] as the paper type for the bypass tray, and then touch [OK].
–
For details on specifying the paper type settings, refer to "Specifying a setting for special paper" on
page 2-93.
5
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
–
To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
2-98
Copy Operations
d-Color MF550/MF450