System Programming; Basic Programming Information - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance

System Programming

System Programming
A primary function of SPM is to provide a method for programming the
communications system. The Sys Program option gives you access to all of the
system programming features available from the system programming console.

Basic Programming Information

To begin programming, you must perform one of the following to display the
System Programming menu on the console or PC:
On the console:
On the PC:
In most cases, you can press
changes. Exceptions to this are noted as part of a procedure. When you
complete a procedure and press
in the menu hierarchy. Occasionally, when you press
the previous screen. In a few cases, pressing
System Programming menu where you can select another option to program or
exit from system programming.
To complete a procedure and save the information you have programmed,
press
Enter
If you are programming a group of sequentially numbered extensions or trunks,
you may have the option of pressing
automatically provides the number of the next extension or trunk in the
sequence, thus saving you a couple of steps. If
you can use it with the current option.
In most cases, you will be at an intermediate step in the procedure you have
just completed. At that point, you can select one of the options shown on the
screen and continue programming, or you can press
Menu
Type
Exit
( ).

Sys Program
spm
P
or 5 to exit from a screen without making any
( ), you usually move up one screen
Exit
!
Exit
( ). This saves your entry and
Next
$
Next
June 1997
Exit
Press any key

( ), you return to
Exit
!
brings you back to the
displays on the screen,
( ) again. This
Exit
!
Issue 1
Page 62
!