Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual page 102

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance
Upgrading the System
Table 14. Programming Needed after Upgrade to Release 5.0
Feature
CTI Link
NOTE:
If the MLX module containing the CTI Link is the first module, use the SPM
program to busy-out the slot.
Calling Group Alarm
Thresholds
HotLine
Calling Group Hunt
Type
Group Calling Delay
Primary
Announcement
Sequence
Busy out the board first:*
Menu
Maintenance
no.
Enter Busy-Out
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
Program the CTI Link (Note: The switch must be in
Hybrid/PBX mode):
AuxEquip CTI Link
number
Enter
Restore the slot:*
Menu
Maintenance
no.
Enter Restore
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
More
Extensions
calling group ext. no.
Threshold 2 or Alarm Threshold 3
calls
Enter Exit
More
Extensions
extension
Enter
More
Extensions
group ext. no.
Enter
Idle Enter Exit
More
Extensions
calling group ext. no.
Enter Exstenion number of Announcent device
program another Announcement device) or
procedure)
Exit
Dial the slot
Slot
Yes
Dial extension
Exit Exit
Dial the slot
Slot
Yes
Grp Calling
Alarm Threshold 1 or Alarm
Enter
Exit
More
HotLine
Exit Exit
Grp Calling
,
Circular Linear
Exit Exit
Grp Calling
Enter Primary Announcement
Continued on next page
Issue 1
June 1997
Page 88
Dial
Queue Alarm
Drop Dial no. of
Enter HotLine
Dial calling
Hunt Type
, or
Most
Dial
DelayAnnce
(to
Enter
(to end
Exit