Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual page 27

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance
Installing the SPM Software
Follow the steps below to perform the SPM initialization.
Type
spm

in Step 2.
Make your entry at the
disk.
Make your entry at the
floppy drive.
Press any key.

Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue
Version X.XX
The screens shown in Steps 3 through 7 appear only if the system has not
been initialized. Otherwise, the screen shown in Step 8 appears.
Select the serial communications port used for SPM and press

COMM PORT:
1. Comm 1
2. Comm 2
Enter selection #
and press
P
to display the SPM Welcome screen shown
prompt if your PC has a hard
C:>
prompt if you are using the
A:>
X.XX = current version of SPM
Type for serial port 1 (COM1).
1
Type for serial port 2 (COM2).
2
Issue 1
June 1997
Page 13
.
P