Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual page 59

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance
Using SPM
After you press
GOTO HARD DISK
appears. Go to Step 4.
Please select file name
to convert from
then press Enter
Press ESC to abort.
FILENAME.XXX and FILENAME.YYY are from the root directory of the disk in
Drive A.
Use the arrow keys to highlight the name of the backup file to be con-

verted and press
If the backup file you select is a 4.0 backup, it can not be converted and
the following message appears:
File has already been converted.
Press Enter to continue.
Press
convert procedure.
If the backup file you select can be converted, go to Step 6.
Observe the updated file selection screen and press

Please select file name
to convert from
then press Enter
N: FILENAME.XXX
Press ESC to abort.
, the
GOTO FLOPPY
P
and a directory listing from the root directory of the floppy disk
,
.
P
to select another filename, or press
P
,
statement shown above changes to
GOTO HARD DISK
FILENAME.XXX
FILENAME.YYY
FILENAME.XXX =the backup filename
selected in Step 4
N = drive
Issue 1
June 1997
Page 45
to abort the
7
.
P