Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual page 38

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance
Accessing SPM
connection is made. (You may have to press
get the password prompt.)
If the PC is in a remote location and your system has not activated the
Remote Access feature, do the following:
— Use the main telephone number to place a voice call to the
— Instruct the operator to transfer you to the modem (by pressing
— To put the modem on line, type
NOTE:
If you enter a telephone number of fewer than 11 digits, you must end it
with a pound sign (#).
To access SPM through a local or remote modem connection, follow the steps
below.
Set up the appropriate physical connections between the PC and the

control unit. See
; the remote access telephone number; the barrier code
ATDT
preceded by a "W" and
below is 555555.
For example:
ATDT12015551234 W555555 W*10
The password prompt appears on the screen when the
system on the line to which the modem is connected.
Transfer, dialing
*10
up the telephone.
''Connecting the
. The barrier code in the example
W*10
P
, then hanging up the telephone).
and press
ATH1
PC''.
Issue 1
June 1997
Page 24
.
P
more than once to
, then hang
P