With A Local Or Remote Modem Connection - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance
Accessing SPM
Press any key to display the SPM Main Menu shown below.

SPM Main Menu
Menu: Select Function
Sys Program

Backup

Boards

Print Opts
Monitor
!
NOTE:
The function keys shown on either side of the display are included
here for quick reference. See
the PC keys in SPM.
If the SPM Main Menu does not appear or if the information on the
screen is garbled, press any key again.
If the COM Port (communications port) screen appears instead of the
SPM Main Menu, it indicates that the SPM software has not been
initialized. See
To select an option, press the function key that corresponds to the

option you want. For example, to select

With a Local or Remote Modem Connection

The method you use to access SPM by modem depends on whether you are
programming on site (locally) or from a remote location.
If you are on site, the modem must be connected to an 012 or 016
module on the control unit. To establish a connection to the control unit's
internal modem, dial
If you are at a remote location, do one of the following:
Maintenance "
Restore #
Pass-Thru $
Password %
Language 
''Initializing the SPM
.
*10
''SPM Screens'' for details on using
Software''.
press
Language
Issue 1
June 1997
Page 22
.