Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual page 51

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance
Using SPM
SPM indicates the status of the backup by displaying the number of the last
block received (
of blocks to be sent from the control unit (
are backing up from Release 1.0.
If you abort the backup, the partial backup file is deleted to prevent restoration
from a corrupted file and you see the screen shown in Step 8.
When the backup is complete, you see the screen shown in Step 9.
To abort the backup press

Press ESC to Abort.
Est. Blocks: xxx - xxxx
filename
BACKUP IN PROGRESS
XMODEM ABORT - User
When the backup is complete, press

Menu.
Backup successful.
Please press Enter
to see the Main Menu
Received xxx Blocks
). Line 2 of the display screen shows the estimated number
xx
7
). This line is blank if you
xxx-xxxx
to return to the SPM Main Menu.
to return to the SPM Main
P
xxx = total number of blocks received
Issue 1
June 1997
Page 37