Before You Begin - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140
System Programming and Maintenance
Upgrading the System
From Release 2.0 to Release 5.0
From Release 2.1 to Release 5.0
From Release 3.0 to Release 5.0
From Release 3.1 to Release 5.0
From Release 4.0 to Release 5.0
From Release 4.1 to Release 5.0
From Release 4.2 to Release 5.0
NOTE:
You must have a version later than SPM 4.15 to upgrade from Release
3.1 to Release 4.0.
MERLIN II Communications System programming cannot be upgraded to this
communications system. The new communications system must be completely
reprogrammed.

Before You Begin

Before you begin the upgrade to Release 5.0, you will need the items listed
below.
SPM Version 5.15 or later to back up and convert system programming
information and to restore system programming information after the
processor module with PCMCIA memory card slot has been installed.
One or both of the following:
— Processor module with PCMCIA memory card slot (when
— A forced installation PCMCIA memory card with Release 5.0
DOS-formatted diskette
converting from Release 2.1 or earlier).
system software (when converting from any release).
Issue 1
June 1997
Page 70