Changing The Stitch Length; Correcting The Balance; Programming Pattern Repeat - Bernina 790 PRO Manual

Creative Sewing

Changing the Stitch Length

> Turn the «Lower Multi-function Knob» to the left to shorten the stitch length.
> Turn the «Lower Multi-function Knob» to the right to elongate the stitch length.
> To call up other setting options, tap «Stitch Length» (1).

Correcting the Balance

Different fabrics, threads and stabilizers can affect the programmed stitch patterns so that they cannot be
sewn out correctly. The electronic balance can correct these deviation and the stitch pattern can be adjusted
optimally to the selected fabric.
> Select a stitch pattern or alphabet.
> Sewing stitch pattern.
> Tap «i-Dialog».
> Tap «Balance».
> Turn the «Upper Multifunction knob» to correct the horizontal direction of the stitch pattern.
> To correct the longitudinal direction of the stitch pattern, turn the «Lower Multi-function Knob» until the
> Altered Balance settings can be saved for each stitch in the «Personal Memory» .
> Altered Balance settings only remain valid until the «Clear Settings» is pushed or the machine is switched

Programming Pattern Repeat

Stitch patterns can be repeated up to 99 times.
> Select a stitch pattern or alphabet.
> Tap «i-Dialog».
> Tap «Pattern Repeat».
x
> Enter the required number of stitch patterns.
68
1
– A preview of the stitch pattern is displayed.
preview of the stitch pattern matches the stitch pattern sewn on the fabric.
off.