Maintenance
•
Disconnect the variable geometry in-
take system connector.
•
Fit a suitably sized shim behind the fil-
ter box cover.
•
Lift the filter box cover on which the
control unit is installed.
•
Do not rotate the cover excessively to
avoid straining the pipes and cables.
•
Plug the intake duct opening with clean
paper
•
Unscrew and remove the three air filter
screws.
•
Remove the filter and replace it with a
new component of the same type.
•
Remove the air filter.
Checking the valve clearance
FRONT HEAD
MAIN - 66
RSV4 Factory